• Home
• What's New
• Leopard Lists
• Shop
• Leopard Fibel
• Fact Files
• Reviews
• Spotlight
• In the Field
• Reader's Models
• Search
• Contact Us
• About Us
• Links

Please note that all kits and conversions listed here are in 1:35 scale.

This page was last updated on Sunday, 22-Dec-2024 19:40:49 EST.

Photo-Etch and Masks

Aber

• German clasps and clamps - 35A093
  
  • the notorious workable clamps, but they can be assembled in a non-workable state (for those of us who wish to keep our sanity)
  • this set was likely designed for use with late WWII German vehicles, but the tool clamps are identical to those used on the Leopard 1 and Leopard 2
  • this set provides a lot of clamps, and represents excellent value for the money

Alliance Modelworks

• LW35057
  
  • Leopard 2A5/2A6 detail set
  • designed for use with the Tamiya kits
  • includes stencils for some common Bundeswehr markings
  
  
• LW35046
  
  • German late WWII tool clamps - suitable for use with modern Bundeswehr vehicles as the design is identical
  • the set includes two types of clamps (which appear to be workable) and 3 types of clamp bases
  • the set provides many many clamps and should last through several projects (with lots of spares for assembly trial and error)

Eduard

• 35101 - Leopard 2 improved (Italeri)
  
  • out of production
  • designed for the Italeri Leopard improved/KWS (Italeri 280 described above)
  
  
• 35302 - Leopard 2A5 KWS (Italeri)
  
  • out of production
  • designed for the Italeri 2A5
  
  
• 35340 - Leopard 2A5 (Tamiya)
  
  • designed for the Tamiya 2A5 (will work for the Tamiya 2A6 as they are basically the same kit)
  
  
• 35707 - Leopard 2A6 (Tamiya)
  
  • out of production
  • designed for the Tamiya 2A6
  
  
• 35974 - Leopard 2A6 (Italeri)
  
  • designed for the Italeri 2A5 (Italeri 365), the Revell 2A5 (Revell 3045), the Italeri 2A6 (Italeri 6435) or the Revell 2A6 (Revell 3060)
  
  
• 36019 - Leopard 2A6M CDN slat armour (Tamiya)
  
  • slat armour for the Leopard 2A6M-CAN
  • designed to be used with the Tamiya 2A6
  • for more information, please refer to Jason Bobrowich's in box review courtesy of Armorama
  
  
• 36028 - Leopard 2A6 (Tamiya)
  
  • designed for the Tamiya 2A6
  
  
• 36043 - Leopard 2A5/6 (Hobby Boss)
  
  • out of production
  • designed for the Hobby Boss 2A5/6
  
  
• 36182 - Leopard 2A6M CDN (Hobby Boss)
  
  • designed for use with the Hobby Boss kit
  • includes generic detail parts which would be suitable for any Hobby Boss Leopard 2A5/6
  • this set does not include engine air intake screens, cooling intake screens, turret bustle basket mesh or the ECM boxes; those bits must be purchased separately (see immediately below)
  
  
• 36184 - Leopard 2A6M CDN mesh
  
  • designed for use with the Hobby Boss Kit
  • includes engine air intake screens, cooling intake screens, turret bustle bin mesh, exhaust grills and retaining chains for the slat armour mounts
  • aside from the slat armour chains, this set would be suitable for use with any Hobby Boss Leopard 2A5/6
  
  
• 36183 - Leopard 2A6M CDN boxes
  
  • out of production
  • designed for use with the Hobby Boss Lot
  • includes the C8 carbine storage box and the ECM boxes mounted on the turret top in addition to a number of slat armour retaining chains
  
  
• TP008 ZOOM - Leopard 2A5 (Tamiya)
  
  • out of production
  • designed for the Tamiya 2A5 (but will work with the Tamiya 2A6 as well)
  • contains engine cooling intake screens, exhaust grills and screens for the main engine air intakes
  
  
• TP080 ZOOM - Leopard 2A6 (Tamiya)
  
  • out of production
  • designed for the Tamiya 2A6 (but will work with the Tamiya 2A5 as well)
  • contains engine cooling intake screens, exhaust grills, screens for the main engine air intakes and a few parts for the commander's PERI sight
  
  
• XT036 - Leopard 2A5 periscope masks (Tamiya)
  
  • periscope masks for the Tamiya 2A5/6
  
  
• XT079 - Leopard 2A5 wheel masks (Tamiya)
  
  • wheel masks for the Tamiya 2A5/6
  
  

E.T. Model

• EA35-115 - German Leopard 2 A5/6 MBT Engine & Turret Rack Grills
  
  • designed for use with the Tamiya Kit
  
  
• EA35-239 - German Leopard 2 A5/6 Main Battle Tank
  
  • designed for use with the Tamiya 2A5 or 2A6
  
  
• E35-240 - German Leopard 2 A4 Main Battle Tank
  
  • designed for use with the Meng 2A4
  
  
• E35-254 - German Leopard 2A7
  
  • designed for use with the Meng 2A7
  
  

Inside the Armour

• Modern German Tool Clamps - 35071
  
  • out of production
  • a set of workable photo-etched tool clamps suitable for use on modern vehicles of German origin
  • the set consists of 21 clamps
  
  

Leopard Club

• LW043 - Leopard 2 Turret Basket Perforated Mesh
  
  • designed for use with the Tamiya 2A5 or 2A6
  • includes the turret bustle bin perforated mesh and retaining chains
  
  

• G35-116
  
  • Complete upgrade set for Leopard 2A5/A6
  • designed for use with the Tamiya Leopard 2A5/6 kits
  • a multi-media set containing several PE frets, copper tow cables, vinyl hose, plastic rod and a few small turned brass parts
  • the PE parts include very nice looking engine cooling intake assemblies with damping springs
  • the PE tool clasps may be workable, but it's hard to tell without seeing the instructions for the set
  • photos of the set are available via the product listing on Hobby Easy

Passion Models

• 35057
  
  • designed for use with the Tamiya 2A5/6, but as the parts seem fairly generic in nature, this set should be usable for other Leopard 2 variants as well
  • includes tool clamps, smoke discharger cap chains, a cable reel, a new loader's hatch MG mount base and skate ring, wiper blades for the driver's episcopes (which is curious because I don't believe these have ever been installed on real Leopard 2s), convoy light panels and a number of other parts not readily identifiable on the fret
  • the set may be obtained via M.S. Models

Perfect Scale Modelbau

• PE004
  
  • Leopard 2 Useful PE Parts
  • a generic set that should be usable for all 1:35 Leopard 2s
  • the fret includes 2A5/6 turret basket grills, engine cooling intake screens, smoke discharger cap chains, 2A5/6 main gun sight bezel and a number of other bits that I can't identify
  
  

Tamiya

• 35272
  
  • photo-etched screen for the turret bustle stowage bins on the Leopard 2A5 or 2A6
  • given that the inclusion of PE parts [with injection molded kits] has become the de-facto standard, this set should have been included with the 2A5/6 kit
  
  

Tetra Model Works

• ME-35018
  
  • Leopard 2A6 update set designed for use with the Italeri 3060 (and the Academy equivalent)
  • read the Leopard Club review for an in-depth look at this set
  
  

Voyager

• AP006
  
  • turret basket mesh designed for use with the Tamiya 2A5 or 2A6
  
  
• AP007
  
  • 2A5/A6 radiator air intake grills
  • designed for the Tamiya 2A5 and 2A6
  
  
• AP036
  
  • modern German tool clamps and clasps
  • appropriate for use with any 1:35 Leopard
  
  
• FE35008
  
  • turret basket mesh designed for use with the Tamiya 2A5 or 2A6
  • it's not really clear why this set exists as it seems to duplicate AP006 ... the only apparent difference being that all parts are included in one fret while AP006 uses 2 frets
  
  
• PE35011
  
  • Leopard 2A5 (designed for use with Tamiya 35242
  • includes replacement copper braided tow cable, soft vinyl slave cable a a few bits of styrene rod
  • refer to the review on PMMS for a more detailed description of this set
  
  
• PE35774
  
  • Leopard 2A4 (designed for use with the Meng TS-016)
  • multi-media set consisting of photo etched brass, styrene rod, braided copper wire, turned brass and aluminum parts
  • it's unclear from the product description but this set may include a L44 gun barrel (presumably PEA363) and German antenna bases
  
  
• PE35775
  
  • Modern Leopard 2A5 Basic
  • deisgned for use the with Tamiya 35242
  • multi-media set consisting of photo etched brass, styrene rod, braided copper wire, turned brass and aluminum parts
  • includes a turned aluminum main gun barrel with a resin bore evacuator
  
  
• PE35776
  
  • Modern Leopard 2A6 Basic
  • deisgned for use the with Tamiya 35271
  • multi-media set consisting of photo etched brass, styrene rod, braided copper wire, turned brass and aluminum parts
  • includes a turned aluminum main gun barrel with a resin bore evacuator
  
  
• PE35859
  
  • Leopard 2A7 (designed for use with Meng TS-027)
  • a multi-media set contain several photo-etch frets, braided coper wire, steel wire, styrene rod and black rubber tubing
  
  
• PE35890
  
  • Modern German Leopard 2A4 Revolution 1 MBT Basic
  • designed for use with Tiger Model 4629
  • a multi-media set consisting of photo-etch frets, steel rod, black rubber tubing and turned brass parts
  • includes replacement slat armour and mounts
  
  
• PE35891
  
  • Modern German Leopard 2A4 Revolution 2 MBT Basic
  • designed for use with Tiger Model 4628
  • a multi-media set consisting of photo-etch frets, steel rod, black rubber tubing and turned brass parts
  • includes replacement slat armour and mounts
  
  
• PE351007
  
  • Modern German Leopard 2A7+ Basic (for Meng TS-042)
  • a multi-media set consisting of photo-etch frets, steel rod, plastic rod, black vinyl tubing and braided copper wire
  
  
• PE351025
  
  • Modern German Leopard 2A5 Basic (for Border BT-002)
  • designed for use with Border BT-002
  • a multi-media set consisting of photo-etch frets, steel rod, plastic rod, black vinyl tubing and braided copper wire
  
  
• PE351026
  
  • Modern German Leopard 2A6 Basic (for Border BT-002)
  • designed for use with Border BT-002
  • a multi-media set consisting of photo-etch frets, steel rod, plastic rod, black vinyl tubing and braided copper wire
  
  
• PE351126
  
  • Modern German Leopard 2A6 MBT (for RFM RM-5072)
  • designed for use with Rye Field Models RM-5076, the Leopard 2A6M-CAN
  • despite the name, this set is clearly intended for a Leopard 2A6M-CAN
  • the set looks to include bar armour parts (hard to tell without instructions or PE fret photos available)
  
  
• PE351205
  
  • Modern German Leopard 2A5 MBT Basic
  • designed for use with Rye Field Models RM-5076, the Leopard 2A6M-CAN
  • a multi-media set consisting of photo-etch frets, steel rod, plastic rod and black vinyl tubing
  
  
• PE351206
  
  • Modern German Leopard 2A6 MBT with Canadian Boxes, Basic
  • designed for use with Rye Field Models RM-5076, the Leopard 2A6M-CAN
  • a multi-media set consisting of photo-etch frets, steel rod, plastic rod and black vinyl tubing
  • it looks like this set contains everything in PE351205 as well as a new fret for the ECM enclosures and the carbine storage box particular to the 2A6M-CAN
  
  
• PE321265
  
  • Designed for use with the Rye Field Model Leoprad 2A6 Ukraine (RFM5103)
  • multi-media set, looks to be based on a general update set for a generic 2A6
  • includes PE ERA bricks
  
  
• PE351266
  
  • Designed for use with the Border Leopard 2A5/6 (BT-002)
  • multi-media set, looks to be based on PE351026
  • include PE ERA bricks
  
  
• PE351290
  
  • designed for use with the Rye Field Model Leopard 2A7 (RFM-5108)
  • multi-media set
  
  
• PE351303
  
  • designed for use with the Tamiya Leopard 2A7V (35387)
  • may be a multi-media set (PE, plastic rod, braided copper cable)
  
  
• PEA363
  
  • Leopard 2A4 light (non-ballistic) side skirts
  • designed for use with the Meng 2A4
  
  
• PEA442
  
  • Modern German Leopard 2A5/A6 track covers
  • non-balistic side skirts deisgned for use presumably any Leoaprd 2A5or 2A6 alghough product photos show this set used with the Border 2A5/6 (BT-002)
  • a multi-media set consisting of PE frets and plastic rod
  
  
• PEA443
  
  • Modern German Leopard 2A4/A5/A6/A7 Simulated Main Gun Combat Effectiveness Device for Exercise (DARKAS)
  • turned brass DARKAS barrels with a PE base
  • suitable for use with most Leopard 2 kits but probably designed for use with Border BT-002
  
  
• PEA465
  
  • Modern German Leopard 2A6M-CAN CDN Boxes
  • this set contains the ECM enclosures and the carbine storage box included with PE351206
  • although the set was originally designed for use with Rye Field Models RM-5076, the parts are universal enough that they can probably be used with any 1:35 Leopard 2A6 kit
  
  
• PRO 35001
  
  • Leopard 2A6 (designed for use with the Tamiya 35271)
  • luxury pack accessory/detailing set consisting of PE, resin parts and a turned Aluminum barrel
  • contains non-ballistic side skirts (as PE parts)
  • refer to the review on PMMS for a more detailed description of this set
  
  
• TE066
  
  • Modern NATO camouflage net pattern 3
  • this set may be used to replicate Barracuda MCS (it looks very promising)
  
  

© Leopard Club
   Contact us at leopardfibel@gmail.com